Workcentre Pro 55 Service Manual

Posted By admin  On 23.04.21



  • To find your service manual on our site, simply begin typing in the search box above. The search box will autocomplete with possible matches listed in it’s drop down list.

    • Read PDF Workcentre Pro 55 Service Manual Workcentre Pro 55 Service Manual Thank you completely much for downloading workcentre pro 55 service manual.Most likely you have knowledge that, people have look numerous times for their favorite books in the same way as this workcentre pro 55 service manual, but stop stirring in harmful downloads. ServiceManuals.net carries service manuals for many different products, including the XEROX WORKCENTRE PRO 215. Visit us online for more information or to download service manuals today. Read PDF Workcentre Pro 55 Service Manual Workcentre Pro 55 Service Manual Thank you completely much for downloading workcentre pro 55 service manual.Most likely you have knowledge that, people have look numerous times for their favorite books in the same way as this workcentre pro 55 service manual, but stop stirring in harmful downloads.


    Pro
  • You can also use the manufacturer list above to browse our current selection of instantly downloadable service manuals.


    • Get supplies and support for WorkCentre Pro 55. Although this product is no longer sold as new, please see our newer models.

  • All service manual downloads are USD $7.99 – $12.99 each, and include schematics and parts list (unless otherwise listed), with the exception of printers / copiers / fax / laptops / sewing machines – no schematics for most (if needed, click on “Contact” above to request a check for schematics for these).


    • Accurate, clear and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
    Present manual XeroxWorkCentre 7830/7835/7845/7855 contain clear instructions and procedures on how to fix the problems occurring in your equipment.
    The information contained in this repair manual is necessary for the repair, but also prevention, resulting in a longer life of your equipment.
    Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
    To see what contain, please read table of contents:

    INTRODUCTION
    About this Manual
    Organization
    How to Use this Documentation
    Symbology and Nomenclature
    Translated Warnings

    Chapter 1. SERVICE CALL PROCEDURES
    Service Call Procedures
    Initial Actions
    Call Flow
    Detailed Maintenance Activities (HFSI) – TBD see note
    Cleaning Procedures
    Final Actions

    Chapter 2. STATUS INDICATOR RAPs

    Chapter 3. IMAGE QUALITY
    Image Quality RAPs
    IQ1 IOT Image Quality Entry RAP
    IQ2 IIT Image Quality Entry RAP
    IQ3 1mm Lines RAP
    IQ4 Image Shift in Process Direction RAP
    IQ5 White Lines RAP
    IQ6 SLED Transfer Cycle Lines RAP
    IQ7 IN-OUT Density Difference RAP
    IQ8 Video Data/Crosstalk RAP
    IQ9 Image Shift in Inboard-to Outboard Direction RAP
    IQ10 Edge-less Image RAP
    IQ11Contamination Lines RAP
    IQ12 Chip/Half Chip Blanks RAP
    IQ13 SLED Transfer Failure RAP
    IQ14 Tapes Not Peeled RAP
    IQ15 Charging Roll Pitch White Lines (type 1)
    IQ16 Charging Roll Pitch White Lines (type 2)
    IQ17 Photoreceptor Pitch Color Lines
    IQ18 Background on Gloss RAP
    IQ19 Toner Empty Detection Color Lines RAP
    IQ20 Toner Droplet Contamination RAP
    IQ21 Smear on Heavyweight RAP
    IQ22 Rough Black RAP
    IQ23 Moist Paper Transfer Failure RAP
    IQ24 Toner Contamination at Lead/Trail Edge RAP
    IQ25 Trail Edge Transfer Failure RAP
    IQ26 Color Lines RAP
    IQ27 Transfer Blank Areas (Partially Moist Paper) RAP
    IQ28 Nip Marks RAP
    IQ29 Moisture RAP
    IQ30 Low Image Density RAP
    IQ31 Wrinkled Image RAP
    IQ32 IOT Background RAP
    IQ33 Color-to-Color Misregistration RAP
    IQ34 Skew/Misregistration RAP
    IQ35 Process Direction Bands, Streaks, and Smears RAP
    IQ36 Unfused Copy/Toner Offset RAP
    IQ37 Repeating Bands, Streaks, Spots, and Smears RAP
    IQ38 Spots RAP
    IQ39 Missing Colors RAP
    IQ40 Background on Coated Paper
    IQ41 Multi Color Transfer Failure
    IQ42 Lines on Coated Paper (EXIT)
    IQ43 Caterpillar Mark (Transfer)
    IQ44 White Stripes Due to Trimmer Jam (DEV)
    IQ45 Heat Haze/Mock Heat Haze
    IQ46 Poor Reproducibility of Fine Lines (IOT Image Quality)
    IQ47 Outboard Deletion in All Colors
    IQ48 MWS (Side 2) (Micro White Spots)
    IQ49 Moist Paper Wrinkles (Fusing Unit)
    IQ50 White Streaks in Process Direction/Dropping Density (XERO/CLN)
    IQ51 Background (IPS)
    IQ52 Light Ink Support (IPS)
    IQ53 Highlight Density Reproduction (NVM Darken +3) (IPS)
    IQ54 Highlight Density Reproduction (NVM Lighten +3) (IPS)
    IQ55 Bleed on Tracing Paper (IPS)
    IQ56 CVT Streaks (IPS)
    IQ57 Copy: Gradation Jump in Text & Photo (IPS)
    IQ58 Scan: Smeared Text, JPEG Mosquito Noise (IPS)
    IQ59 Moire In Text Mode (Fine) BW Scan/Fax For 133 lpi Originals (IPS)
    IQ60 Copy: Bleed on 2 Sided Document (IPS)
    IQ61 Copy: Platen Background (IPS)
    IQ62 Image Quality Difference between Side 1 and Side 2 (Sharpness Adjustment of Side 1 and Side 2)
    IQ63 Image Quality Difference between Side 1 and Side 2 (Color Balance Adjustment of Side 1 and Side 2)
    IQ64 Image Quality Difference between Side 1 and Side 2 (Background Suppression Adjustment of Side 1 and Side 2)
    IQ65 Image Quality Difference between Side 1 and Side 2 (Color Adjustment of Side 1 and Side 2)
    IQ66 Unevenness Correction Within Image Area (IOT Image Quality)
    Test Pattern Usage (dC612)
    Image Quality Specifications
    Things to Note for Image Quality Restrictions

    Chapter 4. REPAIRS AND ADJUSTMENTS
    Chain 1 ElectricalComponents
    REP 1.1 HVPS (1st/2nd/DTC)
    REP 1.2 HVPS (Dev) 7845/55
    REP 1.3 BP PWB
    REP 1.4 (SCC) Motor Driver Sub PWB
    REP 1.5 (SCC) (ISC) MCU-PF PWB
    REP 1.6 (SCC) (ISC) Motor Driver Main PWB
    REP 1.7 (SCC) IH Driver PWB (7830/7835)
    REP 1.8 (SCC) IH Driver PWB (7845/7855)
    REP 1.9 HVPS (Dev/BCR) 7830/35 HVPS (BCR)7845/55
    REP 1.10 SBC Unit
    REP 1.11 SBC SD Card
    REP 1.12 Single Board Controller (SBC) PWB
    REP 1.13 System Disk Drive
    REP 1.14 Opening/Closing the PWB Chassis Unit
    REP 1.15 SBC SIM Card
    Chain 4 Drive
    REP 4.1 Main Drive Assembly (7830/35)
    REP 4.2 Main Drive Assembly (7845/55)
    REP 4.3 Drum/Developer Drive Assembly (7830/35)
    REP 4.4 Drum/Developer Drive Assembly (7845/55)
    Chain 5 DADF
    REP 5.1 DADF (2 Pass)
    REP 5.2 DADF Platen Cushion (2 Pass)
    REP 5.3 DADF Front Cover (2 Pass)
    REP 5.4 DADF Rear Cover (2 Pass)
    REP 5.5 DADF Feeder Assembly (2 Pass)
    REP 5.6 DADF PWB (2 Pass)
    REP 5.7 LeftCounter Balance (2 Pass)
    REP 5.8 Right Counter Balance (2 Pass)
    REP 5.9 DADF Document Tray (2 Pass)
    REP 5.10 Top Cover (2 Pass)
    REP 5.11 Harness Guide and Wire Harness (2 Pass)
    REP 5.12 DADF Registration Motor (2 Pass)
    REP 5.13 DADF Feed Motor (2 Pass)
    REP 5.14 Reg Chute (2 Pass)
    REP 5.15 Retard Chute (2 Pass)
    REP 5.16 Takeaway Roll (2 Pass)
    REP 5.17 Sensor Bracket (2 Pass)
    REP 5.18 Nudger Roll, Feed Roll (2 Pass)
    REP 5.19 Retard Roll (2 Pass)
    Chain 5 DADF
    REP 55.1 DADF (1 Pass)
    REP 55.2 DADF Platen Cushion (1 Pass)
    REP 55.3 DADF Front Cover (1 Pass)
    REP 55.4 DADF Rear Cover (1 Pass)
    REP 55.5 DADF Feeder Assembly (1 Pass)
    REP 55.6 DADF PWB (1 Pass)
    REP 55.7 DD PWB (1 Pass)
    REP 55.8 Left Counter Balance (1 Pass)
    REP 55.9 Right Counter Balance (1 Pass)
    REP 55.10 DADF Document Tray (1 Pass)
    REP 55.11 Top Cover (1 Pass)
    REP 55.12 Harness Guide and Wire Harness (1 Pass)
    REP 55.13 DADF Regi Motor (1 Pass)
    REP 55.14 DADF Feed Motor (1 Pass)
    REP 55.15 DADF Pre Regi Motor (1 Pass)
    REP 55.16 Regi Chute (1 Pass)
    REP 55.17 Retard Chute (1 Pass)
    REP 55.18 Out Chute (1 Pass)
    REP 55.19 CIS (1 Pass)
    REP 55.20 Sensor Bracket (1 Pass)
    REP 55.21 Nudger Roll, Feed Roll (1 Pass)
    REP 55.22 Retard Roll (1 Pass)
    Chain 6 IIT
    REP 6.1 Platen Cushion
    REP 6.2 Platen Glass
    REP 6.3 Control Panel
    REP 6.4 USB Cable
    REP 6.5 Console Assembly
    REP 6.6 CCD Lens Assembly
    REP 6.7 Front/Rear Carriage Cable
    REP 6.8 Carriage Motor
    REP 6.9 LED Lamp PWB
    REP 6.10 LED Lamp Wire Harness
    REP 6.11 Light Guide
    REP 6.12 IIT PWB
    REP 6.13 USB Connector
    REP 6.14 IIT Rear Cover
    Chain 7 Paper Feed
    REP 7.1 Tray 1 Feeder Assembly
    REP 7.2 Tray 1 Feed/Retard/Nudger Roll
    REP 7.3 Tray 2 Feeder Assembly (3TM)
    REP 7.4 Tray 3 Feeder Assembly (3TM)
    REP 7.5Tray 4 Feeder Assembly (3TM)
    REP 7.6 Tray 2 Feed/Retard/Nudger Roll (3TM)
    REP 7.7 Tray 3 Feed/Retard/Nudger Roll (3TM)
    REP 7.8 Tray 4 Feed/Retard/Nudger Roll (3TM)
    REP 7.9 Tray Module PWB (3TM)
    REP 7.10 Tray 3 Assembly (TTM)
    REP 7.11 Tray 4 Assembly (TTM)
    REP 7.12 Tray Cable (TTM)
    REP 7.13 Tray 4 Feeder (TTM)
    REP 7.14 Tray 2 Feeder (TTM)
    REP 7.15 Tray 3 Feeder (TTM)
    REP 7.16 Tray 2 Feed/Retard/Nudger Roll (TTM)
    REP 7.18 Tray 3 Feed/Retard/Nudger Roll (TTM)
    REP 7.19 Tray 4 Feed/Retard/Nudger Roll (TTM)
    REP 7.20 Tray Module PWB (TTM)
    REP 7.21 Tray 5
    REP 7.22 Tray 5 Feed/Retard/Nudger Roll
    REP 7.23 Tray 5 Paper Size Sensor
    REP 7.24 Registration Transport Assembly
    Chain 9 Xerographics
    REP 9.1 Transfer Belt Cleaner Assembly
    REP 9.2 IBT Assembly
    REP 9.3 Transfer Belt
    REP 9.4 TR0 Seal
    REP 9.5 Drum
    REP 9.6 Erase Lamp Unit (K)
    REP 9.7 Erase Lamp Unit (Y, M, C)
    REP 9.8 Agitator Motor Assembly
    REP 9.9 2nd BTR Assembly
    REP 9.10 LED Print Head Assembly (Y, M, C, K)
    REP 9.11 LPH Cable Assembly (7830/35)
    REP 9.12 LPH Cable Assembly (7845/55)
    REP 9.13 Toner Dispense Motor Assembly
    REP 9.14 Developer Housing Assembly (Y, M, C, K)
    REP 9.15 Developer
    REP 9.16 MOB ADC Assembly
    Chain 10 Fuser/Post-Fuser Transport
    REP 10.1 Fuser
    REP 10.2 Duplex Assembly
    Chain 11 Exit/OCT
    REP 11.1 Exit/OCT 1 Assembly
    REP 11.2 Exit 2 Assembly
    Chain 14 Covers
    REP 14.1 L/H Cover Unit
    REP 14.2 Top Cover
    REP 14.3 Rear Lower Cover
    REP 14.4 Opening/Closing the PWB Chassis Unit
    Chain 19 High Capacity Feeder
    REP 19.1 HCF Tray 6
    REP 19.2 HCF Feeder
    REP 19.3 HCF Un-docking
    REP 19.4 HCF Tray Cables
    REP 19.5 HCF Feed, Nudger, Retard Rolls
    REP 19.6 HCF Feed Shaft
    REP 19.7 HCF Retard Lever Spring
    REP 19.8 HCF Nudger Bracket/Nudger Lever/Torsion Spring
    REP 19.9 HCF Casters
    REP 19.10 HCF Takeaway Roll
    REP 19.11 HCF PWB
    REP 19.12 HCF Feed Motor
    Chain 21 Professional Finisher
    REP 21.1 (Pro) Finisher Front Door
    REP 21.2 (Pro) Finisher Rear Upper Cover
    REP 21.3 (Pro) Finisher Rear Lower Cover
    REP 21.4 (Pro) Finisher Top Cover
    REP 21.5 (Pro) Finisher Front Top Cover
    REP 21.6 (Pro) Finisher Top Tray
    REP 21.7 (Pro) Finisher Eject Cover
    REP 21.8 (Pro) Finisher Tray Spring Guide
    REP 21.9 (Pro) Finisher Inner Cover
    REP 21.10 (Pro) Finisher Left Top Cover
    REP 21.11 (Pro) Finisher
    REP 21.12 (Pro) Finisher H-Transport Assembly
    REP 21.13 (Pro) Finisher Punch Frame Assembly
    REP 21.14 (Pro) Finisher Stapler Assembly
    REP 21.15 (Pro) Finisher Stapler Rail
    REP 21.16 (Pro) Finisher Booklet Maker
    REP 21.17 (Pro) Finisher Booklet Stapler
    REP 21.18 (Pro) Finisher Compiler Tray
    REP 21.19 (Pro) Finisher Stacker Tray Position
    REP 21.20 (Pro) Finisher Paddle Shaft
    REP 21.21 (Pro) Finisher Stacker Drive Belt
    REP 21.22 (Pro) Finisher Buffer Path Sensor
    REP 21.23 (Pro) Finisher Gate Sensor
    REP 21.24 (Pro) Finisher Top Tray Full Sensor
    REP 21.25 (Pro) Finisher Buffer Roll
    REP 21.26 (Pro) Finisher Bottom Buffer Chute Assembly
    REP 21.27 (Pro) Finisher H-Transport Drive Belt
    REP 21.28 (Pro) Finisher Eject Chute Assembly
    REP 21.29 (Pro) Finisher PWB
    Chain 22 Integrated Finisher
    REP 22.1 Integrated Office Finisher
    REP 22.2 (Int) Paddle Belt
    REP 22.3 (Int) Sub Paddle Solenoid
    REP 22.5 (Int) Staple Assembly
    REP 22.6 (Int) Set Clamp Home Sensor
    REP 22.7 (Int) Exit Roll Assembly
    REP 22.8 (Int) Pinch Roll
    REP 22.9 (Int) Finisher Entrance Sensor
    REP 22.10 (Int) Compiler Exit Sensor
    REP 22.11 (Int) Main Paddle Shaft Assembly
    REP 22.12 (Int) Lower Chute Assembly
    REP 22.13 (Int) Entrance Roll Assembly
    REP 22.14 (Int) Upper Chute Assembly
    REP 22.15 (Int) Finisher PWB
    REP 22.16 (Int) Stacker Tray Assembly
    REP 22.17 (Int) Stacker Shaft Assembly
    REP 22.18 (Int) Stacker Motor
    REP 22.19 (Int) Stacker Sensor
    REP 22.20 (Int) Compiler Assembly
    REP 22.21 (Int) Set Clamp Shaft
    REP 22.22 (Int) Eject Belt
    REP 22.23 (Int) Eject/Set Clamp Motor Assembly
    REP 22.24 (Int) Rear Tamper Home Sensor
    REP 22.25 (Int) Eject Shaft Assembly
    REP 22.26 (Int) Front /Rear Tamper Motor Assembly
    REP 22.27 (Int) Front Tamper Home Sensor
    REP 22.28 (Int) Eject Clamp Home Sensor
    REP 22.29 (Int) Stack Height Sensor
    Chain 23 Office Finisher LX
    REP 23.1 (LX) H-Transport Assembly
    REP 23.2 (LX) Hole Punch Assembly
    REP 23.3 (LX) H-Transport Belt
    REP 23.4 (LX) H-Transport Motor
    REP 23.5 (LX) Finisher Undocking
    REP 23.6 (LX) Front Cover Assembly
    REP 23.7 (LX) Rear Upper Cover
    REP 23.8 (LX) Rear Lower Cover
    REP 23.9 (LX) Eject Cover
    REP 23.10 (LX) Foot Cover
    REP 23.11 (LX) Stacker Lower Cover
    REP 23.12 (LX) Stacker Upper Cover
    REP 23.13 (LX) Stack Height Sensors 1 and 2
    REP 23.14 (LX) Sub Paddle Solenoid Assembly
    REP 23.15 (LX) Stapler Motor
    REP 23.16 (LX) Finisher Stapler Assembly
    REP 23.17 (LX) Compiler Tray Assembly
    REP 23.18 (LX) Crease Assembly
    REP 23.19 (LX) Stacker Elevator Motor
    REP 23.20 (LX) Stacker Tray
    REP 23.21 (LX) Eject Belt
    REP 23.22 (LX) Eject Motor Assembly
    REP 23.23 (LX) Finisher PWB
    REP 23.24 (LX) Finisher LVPS
    REP 23.25 (LX) Eject Motor
    REP 23.26 (LX) Front/Rear Tamper Motor
    REP 23.27 (LX) Front/Rear Tamper Home Sensors
    REP 23.28 (LX) Compiler No Paper Sensor
    REP 23.29 (LX) Front/Rear Carriage Assembly
    REP 23.30 (LX) Booklet PWB
    REP 23.31 (LX) Booklet Maker Assembly
    REP 23.32 (LX) Booklet Front Cover
    REP 23.33 (LX) Booklet Rear Cover
    REP 23.34 (LX) Booklet Top Cover
    REP 23.35 (LX) Booklet PWB Cover
    REP 23.36 (LX) Booklet Left Cover
    REP 23.37 (LX) Booklet Front/Rear Stapler
    REP 23.38 (LX) Booklet Stapler Move Motor
    Chain 4
    ADJ 4.1 UI Diagnostic Tests
    Chain 5 DADF
    ADJ 5.1 DADF Lead-Skew Adjustment
    ADJ 5.2 DADF Side Registration
    ADJ 5.3 DADF Lead Edge Registration (2 Pass)
    ADJ 5.4 DADF Lead Edge Registration (1 Pass)
    Chain 6 IIT
    ADJ 6.1 Full/Half Rate Carriage Position Adjustment
    ADJ 6.2 IIT Lead Edge Registration
    ADJ 6.3 IIT Side Registration
    ADJ 6.5 IIT Calibration
    ADJ 6.6 Optical Axis Correction
    Chain 7 Paper Feed
    ADJ 7.1 Tray 5 (MSI) Guide Adjustment
    Chain 9 Electrical/Xerographic
    ADJ 9.1 Lead Edge/Side Edge Registration
    ADJ 9.2 Edge Erase Value Adjustment
    ADJ 9.3 ProCon On/Off Print Check
    ADJ 9.5 Thin Line Correction Mode Adjustment
    ADJ 9.6 LPH Exposure Amount Fine Adjustment
    ADJ 9.7 ATC Sensor Setup
    ADJ 9.8 Default Developer ATC Setup
    ADJ 9.9 Registration Measurement Cycle
    ADJ 9.10 Registration Control Setup Cycle
    ADJ 9.11 Registration Control Sensor Check Cycle
    ADJ 9.12 Copy Color Balance Manual Adjustment
    ADJ 9.13 TRC Manual Adjustment
    ADJ 9.14 Toner Density Setup (Tone Up/Down)
    ADJ 9.16 MAX Setup
    Chain 12 Finishers
    ADJ 12.1 Professional Finisher Leveling
    ADJ 12.2 Professional Finisher Booklet Fold Skew
    ADJ 12.3 Professional Finisher Booklet Fold Position
    ADJ 12.4 Professional Finisher Booklet Staple Position (Staple on Fold)
    ADJ 12.5 Professional Finisher Booklet Staple Alignment
    ADJ 12.6 Professional Finisher Booklet Wrinkle
    ADJ 12.7 Professional Finisher Booklet Fold Position (Fine Adjustment)
    ADJ 12.8 Professional Finisher Booklet Staple Position (Staple on Fold Fine Adjustment)4-350
    ADJ 12.9 Finisher LX Hole Punch Position
    ADJ 12.10 Finisher LX Booklet Crease/Staple Position

    Workcentre Pro 55 Service Manual Software

    Chapter 5. PARTS LIST
    Overview
    Introduction
    Subsystem Information
    Symbology
    Parts Lists
    1. IIT/CP
    PL 1.1 Platen/IIT Cover
    PL 1.2 Control Panel/Platen Glass
    PL 1.3 CCD Lens Assembly
    PL 1.4 Carriage Cable/Motor
    PL 1.5 Full/Half Rate Carriage
    PL 1.6 IIT/IPS PWB
    PL 1.7 Control Panel (2 of 2)
    PL 1.8 Control Panel (1 of 2)
    PL 1.9 Convenience Stapler
    2. LED
    PL 2.1 LED Print Head (1 of 2)
    PL 2.2 LED Print Head (2 of 2)
    2. Paper Transport
    PL 2.16 Envelope Tray Assembly
    3. Drives
    PL 3.1 Drives (1 of 4)
    PL 3.2 Drives (2 of 4)
    PL 3.3A Drives (7830/7835)(3 of 4)
    PL 3.3B Drives (7845/7855)(4 of 4)
    4. NOHAD
    PL 4.1 NOHAD Common
    PL 4.2A NOHAD (7830/7835)(1 of 3)
    PL 4.2B NOHAD (7845/7855)(1 of 3)
    PL 4.3A NOHAD (7830/7835)(2 of 3)
    PL 4.3B NOHAD (7845/7855)(2 of 3)
    PL 4.4A NOHAD (7830/7835)(3 of 3)
    PL 4.4B NOHAD (7845/7855)(3 of 3)
    5. Development
    PL 5.1 Development (1 of 2)
    PL 5.2 Development (2 of 2)
    PL 5.3 HVPS Developer (7845/7855)
    6. Transfer
    PL 6.1 Transfer (1 of 2)
    PL 6.2 Transfer (2 of 2)
    PL 6.3 IBT Assembly (1 of 2)
    PL 6.4 IBT Belt Unit (2 of 2)
    7. Fuser
    PL 7.1 Fuser
    8. Xerographic
    PL 8.1 Xerographic (1 of 2)
    PL 8.2 Xerographic (2 of 2)
    9. Paper Transport
    PL 9.1 Tray 1/2 (1 of 2)
    PL 9.2 Tray 1/2 (2 of 2)
    PL 9.3 Tray 1 Feeder
    PL 9.4 Tray 1 Feeder Assembly (1 of 2)
    PL 9.5 Tray 1 Feeder Assembly (2 of 2)
    10. 3TM
    PL 10.1 Three Tray Module (3TM – 7830/35)
    PL 10.2 Tray 2, 3, 4 Assembly (3TM – 7830/35)
    PL 10.3 Tray 2, 3 & 4 Feeder Assembly (1 of 2) (3TM – 7830/35)
    PL 10.4 Tray 2, 3 & 4 Feeder Assembly (3TM) (2 of 2)
    PL 10.9 Electrical (3TM)
    PL 10.12 Roller (3TM)
    PL 10.13 Left Hand Cover Assembly (3TM)
    PL 10.14 Covers (3TM)
    11. Tandem Tray
    PL 11.1 Tandem Tray Assembly (TTM)
    PL 11.2 Tray 2 (TTM)
    PL 11.3 Tray 3 (TTM)
    PL 11.4 Tray 4 (TTM)
    PL 11.5 Tray 4 Paper Feed (TTM)
    PL 11.6 Tray 2/3 Paper Feed (TTM)
    PL 11.7 Tray 2 Feeder (TTM) (1 of 2)
    PL 11.8 Tray 2 Feeder (TTM) (2 of 2)
    PL 11.9 Tray 3 Feeder (TTM) (1 of 2)
    PL 11.10 Tray 3 Feeder (TTM) (2 of 2)
    PL 11.11 Tray 4 Feeder (TTM) (1 of 2)
    PL 11.12 Tray 4 Feeder (TTM) (2 of 2)
    PL 11.13 Left Cover Assembly (TTM)
    PL 11.14 Tray Front Supports (TTM)
    PL 11.15 Tray 2/3/4 Paper and Lift Sensors (TTM)
    PL 11.16 Drive (TTM)
    PL 11.17 Electrical (TTM)
    PL 11.18 Covers (TTM)
    13. Paper Transport
    PL 13.1 Bypass Tray Assembly (1 of 5)
    PL 13.2 Bypass Tray Assembly (2 of 5)
    PL 13.3 Bypass Tray Assembly (3 of 5)
    PL 13.4 Bypass Tray Assembly (4 of 5)
    PL 13.5 Bypass Tray Assembly (5 of 5)
    14. Duplex
    PL 14.1 Left Hand Cover (1 of 2)
    PL 14.2 Left Hand Cover (2 of 2)
    PL 14.3 Left Hand Cover Assembly (1 of 2)
    PL 14.4 Left Hand Cover Assembly (2 of 2)
    PL 14.5 Chute Assembly
    PL 14.6 Duplex Assembly (1 of 2)
    PL 14.7 Duplex Assembly (2 of 2)
    15. Registration
    PL 15.1 Registration (1 of 2)
    PL 15.2 Registration (2 of 2)
    17. Exit
    PL 17.1 Exit 1/OCT, Exit 2
    PL 17.2 Exit 1/OCT
    PL 17.3 Exit 2 (1 of 3)
    PL 17.4 Exit 2 (2 of 3)
    PL 17.5 Exit 2 (3 of 3)
    PL 17.6 Side Tray Unit (1 of 2)
    PL 17.7 Side Tray Unit (2 of 2)
    18. Electrical
    PL 18.1 PWB Chassis Unit (1 of 2)
    PL 18.2A PWB Chassis Unit (Low Speed)
    PL 18.2B PWB Chassis Unit (High Speed)
    PL 18.3 IOT Rear
    PL 18.4 GFI Chassis
    PL 18.5 Front/Right
    PL 18.6A Bottom (Low Speed)
    PL 18.6B Bottom (High Speed)
    PL 18.7 Wire Harness
    19. IOT Covers
    PL 19.1 Covers (1 of 3)
    PL 19.2 Covers (2 of 3)
    PL 19.3 Covers (3 of 3)
    21. Professional Finisher
    PL 21.1 Professional Finisher
    PL 21.2 Finisher Cover (1 of 2)
    PL 21.3 Finisher Cover (2 of 2)
    PL 21.4 Finisher Stack
    PL 21.5 Finisher Punch
    PL 21.6 Finisher Stapler
    PL 21.7 Finisher Eject (1 of 3)
    PL 21.8 Finisher Eject (2 of 3)
    PL 21.9 Finisher Eject (3 of 3)
    PL 21.10 Finisher Transport (1 of 2)
    PL 21.11 Finisher Transport (2 of 2)
    PL 21.12 Finisher Electrical
    PL 21.13 Finisher Harness
    PL 21.15 Booklet Accessory
    PL 21.16 Booklet Component (1 of 7)
    PL 21.17 Booklet Component (2 of 7) (End Guide)
    PL 21.18 Booklet Component (3 of 7)
    PL 21.19 Booklet Component (4 of 7)
    PL 21.20 Booklet Component (5 of 7)
    PL 21.21 Booklet Component (6 of 7) (Chute)
    PL 21.22 Booklet Component (7 of 7)
    PL 21.23 Booklet Tray Component
    PL 21.24 H-Transport (1 of 5)
    PL 21.25 H-Transport (2 of 5)
    PL 21.26 H-Transport (3 of 5)
    PL 21.27 H-Transport (4 of 5)
    PL 21.28 H-Transport (5 of 5)
    22. Integrated Office Finisher
    PL 22.1 Finisher Assembly (Part 1 of 2) (Integrated Office Finisher)
    PL 22.2 Finisher Assembly (Part 2 of 2) (Integrated Office Finisher)
    PL 22.3 Stacker Base Assembly (Part 1 of 5) (Integrated Office Finisher)
    PL 22.4 Stacker Base Assembly (Part 2 of 5) (Integrated Office Finisher)
    PL 22.5 Stacker Base Assembly (Part 3 of 5) (Integrated Office Finisher)
    PL 22.6 Stacker Base Assembly (Part 4 of 5) (Integrated Office Finisher)
    PL 22.7 Stacker Base Assembly (Part 5 of 5) (Integrated Office Finisher)
    PL 22.8 Stacker Tray Assembly (Integrated Office Finisher)
    PL 22.9 Compile Assembly (Part 1 of 2) (Integrated Office Finisher)
    PL 22.10 Compile Assembly (Part 2 of 2) (Integrated Office Finisher)
    23. Office Finisher LX
    PL 23.1 H-Transport Assembly (1 of 5) (Office Finisher LX)
    PL 23.2 H – Transport Assembly (2 of 5) (Office Finisher LX)
    PL 23.3 H – Transport Assembly (3 of 5) (Office Finisher LX)
    PL 23.4 H – Transport Assembly (4 of 5) (Office Finisher LX)
    PL 23.5 H – Transport Assembly (5 of 5) (Office Finisher LX)
    PL 23.6 Finisher Covers (Office Finisher LX)
    PL 23.7 Finisher Stacker (Office Finisher LX)
    PL 23.8 Finisher Stapler (Office Finisher LX)
    PL 23.9 Finisher Eject (1 of 5) (Office Finisher LX)
    PL 23.10 Finisher Eject (2 of 5) (Office Finisher LX)
    PL 23.11 Finisher Eject (3 of 5) (Office Finisher LX)
    PL 23.12 Finisher Eject (4 of 5) (Office Finisher LX)
    PL 23.13 Finisher Eject (5 of 5) (Office Finisher LX)
    PL 23.14 Finisher Exit/Folder Assembly (Office Finisher LX)
    PL 23.15 Folder Assembly (Office Finisher LX)
    PL 23.16 Finisher Electrical (Office Finisher LX)
    PL 23.17 Booklet Cover (Office Finisher LX)
    PL 23.18 Booklet Stapler Assembly (Office Finisher LX)
    PL 23.19 Booklet Front Stapler Assembly (Office Finisher LX)
    PL 23.20 Booklet Rear Stapler Assembly (Office Finisher LX)
    PL 23.21 Booklet Electrical (Office Finisher LX)
    28. HCF
    PL 28.1 HCF Unit
    PL 28.2 HCF Tray 6 (1 of 2)
    PL 28.3 HCF Tray 6 (2 of 2)
    PL 28.4 HCF Feeder (1 of 3)
    PL 28.5 HCF Feeder (2 of 3)
    PL 28.6 HCF Feeder (3 of 3)
    PL 28.7 HCF Top Cover Unit
    PL 28.8 HCF Electrical and Rail
    35. SBC
    PL 35.1 Single Board Controller (1 of 2)
    PL 35.2 Single Board Controller (2 of 2)
    52. DADF
    PL 51.1 DADF Accessory
    51. DADF
    PL 51.2 Covers, PWB
    PL 51.3 Base Frame
    PL 51.4 Document Tray
    PL 51.5 DADF Drives (1 of 2)
    PL 51.6 DADF Drives (2 of 2)
    PL 51.7 Front Belt
    PL 51.8 Registration, Retard, Invert, Output Chutes
    PL 51.9 Roll, Sensor Bracket
    PL 51.10 Document Tray
    PL 51.11 Top Cover
    PL 51.12 Upper Feeder
    PL 51.13 Registration Chute
    PL 51.14 Retard Chute
    PL 51.15 Invert Chute
    PL 51.16 Output Chute
    PL 51.17 Sensor Bracket
    55. DADF (High Speed)
    PL 55.1 DADF Accessory
    PL 55.2 DADF Cover, PWB
    PL 55.3 DADF Base Frame
    PL 55.4 DADF Document Tray, Top Cover
    PL 55.5 DADF Motor, Wire Harness
    PL 55.6 DADF Front Belt
    PL 55.7 DADF Regi/Retard/Out Chute
    PL 55.8 DADF CIS
    55. DADF (High Speed)
    PL 55.9 DADF Roll, Sensor Bracket
    PL 55.10 DADF Document Tray
    PL 55.11 DADF Top Cover
    PL 55.12 DADF Upper Feeder
    PL 55.13 DADF Regi Chute
    PL 55.14 DADF Retard Chute
    PL 55.15 DADF Out Chute
    PL 55.16 DADF Sensor Bracket
    Common Hardware
    Common Hardware

    Chapter 6. GENERAL PROCEDURES
    UI Diagnostics
    UI Diagnostic (CSE) Mode
    Service Copy (Tools) Mode
    UI Panel Testing
    dC104 System Usage Counters
    dC108 Software Versions
    dC120 Fault Counter
    dC122 Fault History
    dC128 Fold Position Adjustment
    dC129 System Registration Setup
    dC131 NVM Read/Write
    dC132 Serial Number Synchronize
    dC135 HFSI Counters
    dC140 Analog Monitor
    dC301 NVM Initialization
    dC304 LPH EEPROM Self test
    dC312 Network Echo Tests
    dC330 Component Control
    dC361 NVM Save and Restore
    dC603 Image Size Adjustment
    dC608 Document Feeder Registration
    dC609 Document Glass Registration
    dC612 Test Pattern Print
    dC640 Video Path Tests
    dC671 RegiCon Measurement Cycle Control
    dC673 RegiCon Control Sensor Check Cycle
    dC675 RegiCon Setup Cycle Control
    dC710 No Paper Run
    dC740 Tray 5 (MSI) Guide Adjustment
    dC909 Calibrate for Paper
    dC919 Color Balance Adjustment
    dC924 TRC Adjustment
    dC937 ProCon On/Off Print
    dC945 IIT Calibration
    dC949 ATC Default Developer Setup
    dC950 ATC Sensor Setup
    dC991 Tone Up/Tone Down
    dC1202 Hole Position Adjustment
    dC2006 Side 1 to Side 2 Color Matching
    General Procedures
    GP 1 FAX PWB Internal Selftest
    GP 2 Accessing Tools
    GP 3 Controller Boot Sequence
    GP 5 Image Quality Calibration
    GP 6 Printing Configuration Reports
    GP 7 Network Printing Simulation
    GP 9 Installing System Software
    GP 10 PWS Communication with the SBC
    GP 11 Resetting the System Administrator Password
    GP 13 Cloning Network Configurations
    GP 14 External Fax Line Test
    GP 16 Toner CRUM Conversion
    GP 18 Restoring the Public Address Book
    GP 20 Reporting Billing Meter Resets
    GP 22 Foreign Device Interface Setup
    GP 23 Intermittent or Noise Problem RAP
    GP 24 How to turn off the Power Saver Functions
    GP 25 Remote Control Panel
    GP 26 Obtaining a Replacement SIM Card
    General Information
    Product Codes
    Common Tools
    Product Tools and Test Patterns
    Cleaning Materials
    CRUs and Consumables
    Glossary of Terms
    Change Tags
    Change Tags

    Xerox Workcentre Pro 133

    Chapter 7. WIRING DATA
    7.1 Plug/Jack Location List
    Plug/Jack Location
    IOT Plug/Jack Illustrations
    HCF Plug/Jack Illustrations
    Professional Finisher Plug/Jack Illustrations
    Integrated Office Finisher Plug/Jack Illustrations
    Office Finisher LX Plug/Jack Illustrations
    7.2 Wire Network
    AC Wirenets
    1.8 VDC Wirenets
    1.8 VRTN Wirenet
    +2.5 VDC Wirenet
    2.5VDC RTN
    +3.3 VDC-1 Wirenet
    + 3.3 VDC-2 Wirenet
    3.3 VDC RTN-1 Wirenet
    3.3 VDC RTN-2 Wirenet
    +5VDC-1 Wirenet
    +5VDC-2 Wirenet
    +5VDC-3 Wirenet
    +5VDC-4 Wirenet
    +5VDC-5 Wirenet
    +5VDC-6 Wirenet
    5VRTN-1 Wirenet
    5VDC RTN-2 Wirenet
    5VDC RTN-3 Wirenet
    5VDC RTN-4 Wirenet
    5VDC RTN-5 Wirenet
    5VDC RTN-6 Wirenet
    +24VDC-1 Wirenet
    +24VDC-2 Wirenet
    +24VDC-3 Wirenet
    +24VDC-4 Wirenet
    24VDC RTN-1 Wirenet
    24VDC RTN-2 Wirenet
    24VDC RTN-3 Wirenet
    IIT +3.3/+24VDC/ANA Wirenet
    IIT_3.3/24/ANA VRTN Wirenet
    IIT +5 VDC Wirenet
    IIT +5 VDC RTN Wirenet
    DADF +5VDC Wirenet (DADF-110)
    DADF 5VRTN Wirenet (DADF-110)
    DADF +5VDC Wirenet (DADF-130 / 1 Pass)
    DADF 5VRTN Wirenet (DADF-130)
    DADF +24VDC Wirenet (DADF-110)
    DADF +24VDC Wirenet (DADF-130)
    DADF +24VRTN Wirenet
    HCF +24VDC Wirenet
    HCF +5VDC Wirenet
    HCF DC COM Wirenet
    Finisher (Int) +24VDC/24VDC RTN
    Finisher (Int) +5VDC Wirenet
    Finisher (Int) DC COM Wirenet
    Office Finisher LX Wirenets
    A/P Finisher Wirenets
    Block Schematic Diagrams (BSDs)
    WorkCentre 7830/7835/7845/7855 BSDs
    Chain 1 BSDs
    Chain 2 BSDs
    Chain 3 BSDs
    Chain 4 BSDs
    Chain 5 BSDs
    Chain 6 BSDs
    Chain 7 BSDs
    Chain 8 BSDs
    Chain 9 BSDs
    Chain 10 BSDs
    Chain 12 BSDs
    Chain 34 BSDs

    WorkCentre7830 WorkCentre7835 WorkCentre7845 WorkCentre7855 WorkCentre-7830 WorkCentre-7835 WorkCentre-7845 WorkCentre-7855 wc wc7830 Wc7835 Wc7845 Wc7855 wc-7830 Wc-7835 Wc-7845 Wc-7855 center